Dent Fix EZ Nitrogen Plastic Welder – DF-EZN1

Dent Fix EZ Nitrogen Plastic Welder

The EZ Nitrogen Plastic Welder is unique in its use of proprietary Flow Adjust Switch Technology (FAST). The FAST system makes the DF-EZN1 the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done fast.

Equipped with two welders, it incorporates both a nitrogen welding torch and an airless welding torch. The nitrogen torch is air cooled. It is essential to establish and maintain air flow before turning the welder on, and air flow must be maintained until the nitrogen torch cools down. (Usually 10 minutes to cool down after powering down)

The unit comes with plastic rod in various types and sizes to enable the user to weld different types of plastic and different types of damages. Also included is a roll of aluminum tape to hold parts together when welding. The hand seaming tool help shapes, flatten, and insure that repaired flanges and tabs are the correct thickness.

The cart is equipped with a nitrogen welder, storage cart, tank regulator, aluminum tape, heat gunholster, hand seamer, and an assortment of consumable plastic rods.

The welder uses 110volts and a maximum of 10amps, total consumption is a maximum of 600watts.

Features:

• Power Switch – Turns the welderon/off
• N2 Torch Temperature Control -Turns the nitrogen torch on/off & sets the temperature
• Airless Temperature Control -Turns the airless torch on/off & sets the temperature
• Flow Adjust Switch – Changes the flow of the nitrogen torch from air (cooling) to gas (welding)
• Circuit Breaker – Protects the welder from over power, acts like a fuse. Resets with a push
• Airless Receptacle – For plugging in the airless torch only
• Air Regulator – Sets and holds the input air pressure at the proper 20psi
• Tank Regulator – Sets & holds the input gas at the proper 20psi
• Nitrogen Torch – Used for nitrogen welding
• Airless torch – Used for airless welding

Ships by truck freight. You will be contacted with final shipping charges.

WARNING: Cancer and Reproductive Harm –