Lord Fusor Direct To Metal Sealer Adhesive

Single component direct-to-metal – no substrate primer required

• Non-sag adhesive strength for trim bonding
• Duplicates a factory appearance on standing seams, truck bed seams, tooled door skin seam, and more!
• Weld-thru with no burn back
• UV resistant
• Suggested applications: standing seams, cosmetic seams, truck bed seams, tooled door skin seams, floor pan seams, core support seams, brushed seams and other applications in which a non-sag cosmetic seam sealer is required
• 9.5 oz
• Available in: Neutral and Black

• Skin Time: 25 min.@ 70 °F (21 °C), 50% RH
• Paint Time @ 70°F: immediately or up to 30 days without a scuff
• Cure Time: 72 hr.@ 70 °F (21 °C)

* Through cure may vary depending on temperature and humidity. Product cures 1/8 inch every 24 hours. Product thickness will determine full cure time.

WARNING: This product can expose you to chemicals including Diisononyl phthalate (DINP) which is known to the State of California to cause Cancer. For more information go to